| About |
|---|
| High Viscosity PEEK Features: Excellent Chemical Resistance Low Temperature Impact Resistance Good Dimensional Stability Applications: Automotive Industrial Military Aerospace&& |
| Product Description | |
|---|---|
| Generic | PEEK |
| Material Status | Commercial: Active |
| Features | High Viscosity,Good Dimensional Stability,Solvent resistance,low-temperature impact resistance |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.30 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 400℃，2.16kg | 3.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D638 | ||
| yield | 95.8 | MPa | ASTM D638 |
| fracture | 96.2 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 5.0 to 6.0 | % | ASTM D638 |
| fracture | 20 to 30 | % | ASTM D638 |
| Bending modulus | 3720 | MPa | ASTM D790 |
| bending strength | 155 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，3.2mm | 91 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 315 | ℃ | ASTM D648 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 138 to 149 | °C | |
| Drying time | 3.0 to 5.0 | hr | |
| Barrel rear temperature | 343 to 360 | °C | |
| Barrel middle temperature | 357 to 371 | °C | |
| Barrel front temperature | 366 to 382 | °C | |
| Nozzle temperature | 366 to 382 | °C | |
| Processing (melt) temperature | 366 to 382 | °C | |
| Mold temperature | 177 to 204 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |