| About |
|---|
| WELLAMID Nylon 6600 MZ 401 CP是一种聚酰胺66（尼龙66）材料,含有的填充物为填料。 该产品在欧洲有供货,。 WELLAMID Nylon 6600 MZ 401 CP的主要特性为:阻燃/额定火焰。&& |
| Product Description | |
|---|---|
| Supplier | Ensinger |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.22 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 23℃，24hr | 0.15 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 64 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 138 | ℃ | ASTM D648 |
| Continuous use temperature | 127 | ℃ | |
| Linear coefficient of thermal expansion | |||
| MD：-54~121℃ | 6.7E-4 | 1/℃ | ASTM E831 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Electrostatic attenuation | 20 | msec | FTMS 101C 4046.1 |
| Surface resistance | |||
| @ 100V | 1.0E+7 to 1.0E+9 | ohms | |
| Volumetric resistance | |||
| @ 10V | 1.0E+7 to 1.0E+10 | ohms |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| M-level | 120 | ASTM D785 | |
| Tensile modulus | 2300 | MPa | ASTM D638 |
| tensile strength | |||
| fracture | 62.1 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 8.0 | % | ASTM D638 |
| Bending modulus | 2340 | MPa | ASTM D790 |
| bending strength | 74.5 | MPa | ASTM D790 |
| compressive strength | 84.8 | MPa | ASTM D695 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |