Emulprene® 10101A

About
Description: E10101A is a cross-linked emulsion styrene-butadiene copolymer with divinyl benzene, using a mix of rosin and fatty acid as emulsifier. It is coagulated with Aluminum-acid and stabilized with a non-staining antioxidant. It is produced in acordance with good manufacturing practices and complies with FDA 21 CFR §175.300, §177.1210 and §178.3910 for use in food contact applications. Applications: E10101A gives excellent dimensional stability to compounds, reduces die swell and shrinkage in extruded products. It is also recommended for improving cohesive strength in adhesives and sealants which will be in contact with food or beverages.&&

About

Description: E10101A is a cross-linked emulsion styrene-butadiene copolymer with divinyl benzene, using a mix of rosin and fatty acid as emulsifier. It is coagulated with Aluminum-acid and stabilized with a non-staining antioxidant. It is produced in acordance with good manufacturing practices and complies with FDA 21 CFR §175.300, §177.1210 and §178.3910 for use in food contact applications. Applications: E10101A gives excellent dimensional stability to compounds, reduces die swell and shrinkage in extruded products. It is also recommended for improving cohesive strength in adhesives and sealants which will be in contact with food or beverages.&&

Product Description
Generic	SBR-乳液聚合
Material Status	Commercial: Active
Features	The fouling resistance,Good Dimensional Stability,Food contact compliance,Good bond,Inoxidizability,Copolymer
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Mooney viscosity
ML 1+4，100℃	115	MU	ASTM D1646
Organic Acid	4.3 to 6.3	%	ASTM D5774
Soap	< 0.30	%	ASTM D5774
styrene content
Bound	42 to 45	%	ASTM D5775
Ash Content	< 0.80	%	ASTM D5667
Volatiles	< 0.80	%	ASTM D5668
Shrinkage rate	< 15	%	ASTM D1917

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	13.1	MPa	ASTM D3185
tensile strength	15.9	MPa	ASTM D3185
Tensile strain
fracture	360	%	ASTM D3185

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.