| About |
|---|
| NHU-PPA N200 NHU-PPA Polymer is a polyamide-class high temperature nylon resin with high distortion temperature, excellent tenacity and frictional resistance. Featuring good melt flow rate, PPA resin boasts excellent injection molding processibility, acid, alkali and general chemical resistance as well as outstanding mechanical strength.&&NHU-PPA N200 NHU-PPA Polymer is a polyamide-class high temperature nylon resin with high distortion temperature, excellent tenacity and frictional resistance. Featuring good melt flow rate, PPA resin boasts excellent injection molding processibility, acid, alkali and general chemical resistance as well as outstanding mechanical strength.&& |
| Product Description | |
|---|---|
| Supplier | NHU |
| Generic | PPA |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good flexibility,Good liquidity,Solvent resistance |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20 | g/cm³ | ISO 1183 |
| Viscosity number | 90.0 | cm³/g | ISO 307 |
| water content | |||
| 150℃ | 0.25 | % | |
| Ash Content | |||
| 150℃ | 0.25 | % | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 123 | ℃ | ISO 11357-2 |
| Melting temperature | 315 | ℃ | ISO 11357-3 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 150°C, 0.3 hour |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |