| About |
|---|
| HD-7260 is an injection molding resin which is manufactured by the suspension polymerization of thylene monomer. HD-7260 (I3) is a high density polyethylene with 1-Butene as co monomer. This grade apply for transport and stacking , bottle crates, engineering parts , closures and etc. Features low warpage High density, hardness and stiffness. Good impact strength and good stess cracking resistance Applications Injection moulding Crates Engineering parts Closures&& |
| Product Description | |
|---|---|
| Supplier | Jam |
| Generic | HDPE |
| Material Status | Commercial: Negative |
| Features | Good Rigidity,Low warping,High impact resistance,Good Hardness,Inoxidizability,Lubricating,High density,Butylene copolymer,High ESCR |
| Availabilitys | Africa & Middle East ,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.962 | g/cm³ | ISO 1183 |
| Melt Flow Rate | ISO 1133 | ||
| 190℃，2.16kg | 8.0 | g/10min | ISO 1133 |
| 190℃，5.0kg | 23 | g/10min | ISO 1133 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 4.0 | kJ/m² | ISO 179/1eA |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |