| About |
|---|
| Dynaglide DW 612 uses a very special grade of a graphite in the manufacture of this filled PTFE. This material exhibits excellent friction and wear properties. Color Black Manufactured in thickness range of 0.010 To 0.064. Used in both bearing and seal applications. Exhibits low friction and excellent wear properties. Can be used with soft mating surfaces, such as stainless steel, bronze and aluminum.&& |
| Product Description | |
|---|---|
| Generic | PTFE |
| Material Status | Commercial: Active |
| Features | Low coefficient of friction,Good wear resistance |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.12 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 17.2 | MPa | ASTM D1457 |
| Tensile strain | |||
| fracture | 150 | % | ASTM D1457 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Linear coefficient of thermal expansion | ASTM D696 | ||
| MD | 7.9E-5 | 1/℃ | ASTM D696 |
| TD | 1.3E-4 | 1/℃ | ASTM D696 |
| deformation | 2.5 | % | ASTM D621 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Core ID | 7.62 | cm | |
| Width | 12.7 to 305 | mm |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |