INTOL® 1500

About
Intol ® 1500 is an emulsion styrene-butadiene rubber obtained by cold polymerisation using a rosin acid soap as emulsifier. It is made at the Hythe production facility in UK. A non-staining antioxidant is added during the production process. Key Features E-SBR is a general purpose rubber characterised by good processability, mechanical properties and abrasion resistance. It has a limited resistance to oil and weather but properly compounded, it is suitable for use in outdoor applications. The use of rosin acid soap results in a higher tack of the green compound and a slightly slower cure rate compared to fatty/rosin acid emulsified types. Main Applications Tyre manufacturing and retreading, conveyor belts, hoses and other mechanical goods.&&

Product Description
GenericSBR-乳液聚合
Material StatusCommercial: Active
FeaturesExcellent Processability,Inoxidizability,Copolymer,Good wear resistance
AvailabilitysAfrica & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Mooney viscosity
ML 1+4,100℃52MUASTM D1646
Combined with styrene23.5%ASTM D5775
Organic Acid6.0wt%ASTM D5774
Soap< 0.5wt%ASTM D5774
Ash Content< 0.5%ASTM D5667
Volatiles< 0.75wt%ASTM D5668

Notes
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.