| About |
|---|
| Medium Impact Styrene-Butadiene Copolymer in form of translucent pellet, that shows flexibility, processability, easy molding.&& |
| Product Description | |
|---|---|
| Generic | SBC |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good flexibility,Disposable,Copolymer |
| Availabilitys | Latin America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 200℃，5.0kg | 5.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D638 | ||
| yield | 29.9 | MPa | ASTM D638 |
| fracture | 31.9 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 33 | % | ASTM D638 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 76 | J/m | ASTM D256 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Yellowness index | 16 | YI | ASTM D1925 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |