| About |
|---|
| AMPLIFY™ IO 3702 Ethylene Acrylic Acid Ionomer is for blown, cast, and extrusion coating for flexible packaging applications. It provides excellent sealability in coextrusions with nylon and other film structures. For Food and Specialty Applications Excellent Sealant for use in blown, cast film, and extrusion coating Complies with: U.S. FDA 21 CFR 177.1310 (c) EU, No 10/2011 Consult the regulations for complete details.&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | 离聚物 |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.940 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 14 | g/10min | ASTM D1238 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| DSC | 92.2 | ℃ | Internal Method |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 232 | °C | |
| Shrinkage (288°C, 25.4 μm) | 108.0 | mm | |
| Maximum line speed | > 7.6 | m/sec | |
| Minimum coating thickness | < 7.4 | µm | |
| Minimum coating weight | 4.9 | g/m² | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |