3M™ Dyneon™ Perfluoroelastomer PFE 7301BZ

About
The 3M™ Dyneon™ Perfluoroelastomer compound PFE 7301BZ is a high temperature perfluoroelastomer with a broad chemical resistance and excellent physical properties at continuous high service temperatures up to 320°C. It is ideally suited for applications in the aerospace and chemical processing industry. Special Features Proprietary 80 Shore A black compound Designed for high temperature applications Continuous operating temperature of >300°C Low long term compression set Excellent chemical resistance Superior resistance to HTS oils Typical Applications Finished parts based on 3M™ Dyneon™ Perfluoroelastomer compounds like PFE 7301BZ are used for true high temperature applications in the aerospace and the chemical processing industry. Typical applications are aero engine sealing systems or gearbox seals.&&

About

The 3M™ Dyneon™ Perfluoroelastomer compound PFE 7301BZ is a high temperature perfluoroelastomer with a broad chemical resistance and excellent physical properties at continuous high service temperatures up to 320°C. It is ideally suited for applications in the aerospace and chemical processing industry. Special Features Proprietary 80 Shore A black compound Designed for high temperature applications Continuous operating temperature of >300°C Low long term compression set Excellent chemical resistance Superior resistance to HTS oils Typical Applications Finished parts based on 3M™ Dyneon™ Perfluoroelastomer compounds like PFE 7301BZ are used for true high temperature applications in the aerospace and the chemical processing industry. Typical applications are aero engine sealing systems or gearbox seals.&&

Product Description
Generic	PFE
Material Status	Commercial: Active
Features	Good Dimensional Stability,High Heat Resistance,Grease resistance,Solvent resistance
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.01	g/cm³	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	80		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength	17.0	MPa	DIN 53504
100% strain	12.5	MPa	DIN 53504
Tensile strain
fracture	150	%	DIN 53504
Compression deformation			ASTM D395B
200℃，70 hr	14	%	ASTM D395B
316℃，70 hr	44	%	ASTM D395B

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.