UNITIKA Nylon 6 A3130HR-25

About
UNITIKA Nylon 6 A3130HR-25 is a Polyamide 6 (Nylon 6) material filled with 25% mineral. It is available in Asia Pacific or North America. Primary attribute of UNITIKA Nylon 6 A3130HR-25: Flame Rated. Typical applications include: Automotive Construction Applications Housings&&

Product Description
Supplier	UNITIKA
Generic	PA6
Material Status	Commercial: Active
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.33	g/cm³	ISO 1183
Shrinkage rate			ISO 294-4
TD：3.2 mm	0.60 to 1.0	%	ISO 294-4
MD：3.2 mm	0.60 to 1.0	%	ISO 294-4
Water absorption rate			ISO 62
23℃，24hr	1.4	%	ISO 62
Equilibrium, 23 ℃, 50% RH	2.1	%	ISO 62

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	3.0	kJ/m²	ISO 179
Charpy Unnotch Impact strength	52	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	195	℃	ISO 75-2/B
1.8 MPa, unannealed	111	℃	ISO 75-2/A
Linear coefficient of thermal expansion
MD	5.0E-5	1/℃	ISO 11359-2

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	119		ISO 2039-2
Tensile modulus	5400	MPa	ISO 527-2
tensile strength
fracture	70.0	MPa	ISO 527-2
Tensile strain
fracture	3.5	%	ISO 527-2
Bending modulus	4200	MPa	ISO 178
bending strength	108	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.