Ecomass® 1050ZB92

About
Ecomass® Compound 1050ZB92. Nontoxic alternative to Lead (Pb), radiation shielding applications. Features: Moderate Specific Gravity, Filled Polyamide (PA) Alloy, Good Toughness.&&

Product Description
Generic	PA12
Material Status	Commercial: Active
Features	Good flexibility,Nontoxicity
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	6.88	g/cm³	ASTM D792
Shrinkage rate
MD	0.50 to 0.60	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	6210	MPa	ASTM D638
tensile strength	44.8	MPa	ASTM D638
Tensile strain
fracture	1.8	%	ASTM D638
Bending modulus	4960	MPa	ASTM D790
bending strength	48.3	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	110	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed	121	℃	ASTM D648
1.8 MPa, unannealed	107	℃	ASTM D648

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	74	°C
Drying time	4.0	hr
Processing (melt) temperature	232 to 260	°C
Mold temperature	66 to 82	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.