| About |
|---|
| OnFlex™ AF 7210-40 is an easy processing TPE designed for a variety of automotive applications. Excellent surface finish Good adhesion to polypropylene Excellent performance in static mechanical parts such as seals & grips, panel fasteners, plugs, clips and cable clamps. Good UV stability OnFlex™ AF 7210-40B = black OnFlex™ AF 7210-40N = natural&& |
| Product Description | |
|---|---|
| Supplier | Polyone |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.990 | g/cm³ | ASTM D792，ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 3 seconds | 40 | ISO 868 | |
| Shore A, 10 seconds | 36 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 5.00 | MPa | ISO 37 , ASTM D412 |
| Tensile strain | |||
| fracture | 600 | % | ISO 37 |
| fracture | 650 | % | ASTM D412 |
| tear strength | |||
| — | 21.0 | kN/m | ISO 34-1 |
| — | 17.5 | kN/m | ASTM D624 |
| Compression deformation | |||
| 23℃，72 hr | 16 | % | ISO 815 |
| 23℃，72 hr | 18 | % | ASTM D395 |
| 70℃，22 hr | 32 | % | ISO 815 |
| 70℃，22 hr | 35 | % | ASTM D395 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Burning rate | < 100 | mm/min | DIN 75200 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Weathering resistance | expected to pass | SAE J2527 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Proposed maximum recycled material ratio | 20 | % | |
| Barrel rear temperature | 160 to 188 | °C | |
| Barrel middle temperature | 177 to 193 | °C | |
| Barrel front temperature | 188 to 210 | °C | |
| Nozzle temperature | 188 to 216 | °C | |
| Mold temperature | 30 to 60 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. China |
| 3. Europe |
| 4. OnFlex AF 7210-60B (60Sh; black) as part of the AF-range has been tested according weathering test SAE J2527. It has successfully passed the extended test time of 1500h. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |