AGILITY™ 1022 Performance LDPE

About
AGILITY™ 1022 Performance LDPE resin is a high pressure LDPE resin designed to run at faster output rates on blown film lines in LLDPE blends while maintaining optics. Main Characteristics: Faster Processing LDPE resin Designed for higher output rates in blends with LLDPE resin at 20-30% loading Optimized molecular structure gives improved optics in blends with LLDPE reins Complies with: U.S.FDA 21 CFR 177.1520 (c) 2.1 EU No 10/2011 Canadian HPFB No Objection Consult the regulations for complete details&&

About

AGILITY™ 1022 Performance LDPE resin is a high pressure LDPE resin designed to run at faster output rates on blown film lines in LLDPE blends while maintaining optics. Main Characteristics: Faster Processing LDPE resin Designed for higher output rates in blends with LLDPE resin at 20-30% loading Optimized molecular structure gives improved optics in blends with LLDPE reins Complies with: U.S.FDA 21 CFR 177.1520 (c) 2.1 EU No 10/2011 Canadian HPFB No Objection Consult the regulations for complete details&&

Product Description
Supplier	DOW
Generic	LDPE
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.921	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	1.9	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	25	µm
Membrane puncture strength	0.452	J
Membrane puncture force	17.8	N
Membrane puncture resistance	2.48	J/cm³
Membrane strength			ASTM D882
MD	28.1	J/cm³	ASTM D882
TD	42.2	J/cm³	ASTM D882
Secant modulus			ASTM D882
1% secant, MD	201	MPa	ASTM D882
2% secant, MD	181	MPa	ASTM D882
1% secant, TD	250	MPa	ASTM D882
2% secant, TD	212	MPa	ASTM D882
tensile strength			ASTM D882
MD, yield	10.7	MPa	ASTM D882
TD, yield	11.7	MPa	ASTM D882
MD, fracture	23.1	MPa	ASTM D882
TD, fracture	13.4	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture	150	%	ASTM D882
TD, fracture	380	%	ASTM D882
Drop hammer impact	55	g	ASTM D1709-A
Elmandorf tear strength			ASTM D1922
MD	260	g	ASTM D1922
TD	120	g	ASTM D1922

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	91.0	℃	ASTM D1525
Melting temperature
DSC	109	℃	Internal Method

optical performance	Nominal value	Unit	Test method
gloss
45°	60		ASTM D2457
Haze	8.0	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.