| About |
|---|
| LLBD-2024G is a certified prime Butene-ethylene copolymer, designed for COMPOUNDING applications requiring good melt viscosity and good melt flow to assure thorough mixing and dispersion of components. LLBD-2024G features medium melt flow, easy processability, wide process window, and improved dispersion capability. LLBD-2024G applications include distributive melt mixing of additives and color concentrates, Master-Batches, and tailoring compounds to property requirements of a given end-use. LLBD-2024G is supplied in granular form. Suggested processing temperature is 180° to 220°C. LLBD-2024G complies with FDA regulation 21CFR 177.1520 (c) 3.1 (a) and with most international regulations concerning the use of Polyethylene in contact with food articles.&& |
| Product Description | |
|---|---|
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Machinable,Food contact compliance,Moderate liquidity,Copolymer,Butylene copolymer |
| Availabilitys | Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 20 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 50 ℃, 3.00 mm, 100% non-ionic surfactant, molded, F50 | 150 | hr | ASTM D1693A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, molding | 12.4 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, molded | 300 | % | ASTM D638 |
| Bending modulus | |||
| 1% cut, molded | 448 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile impact strength | |||
| Compression Molding | 71.5 | kJ/m² | ASTM D1822 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 180 to 220 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Non-slit strip |
| 3. 2.0 in/min |
| 4. 0.051 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |