ALCOM® PA66 910/1.1 CF10 PTFE10

About
ALCOM® PA66 910/1.1 CF10 PTFE10 is a Polyamide 66 (Nylon 66) product filled with 10% carbon fiber and 10% ptfe fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive. Characteristics include: RoHS Compliant Conductive Heat Resistant Wear Resistant&&

Product Description
Supplier	ALBIS
Generic	PA66
Material Status	Commercial: Active
Availabilitys	North America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.24	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	8900	MPa	ISO 527-2
tensile strength
fracture	155	MPa	ISO 527-2
Tensile strain
fracture	3.0	%	ISO 527-2
Bending modulus	7500	MPa	ISO 178
bending strength	220	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	5.0	kJ/m²	ISO 179-1eA
Charpy Unnotch Impact strength	35	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	240	℃	ISO 75-2/A
Vicat Softening Temp
B50	250	℃	ISO 306
Melting temperature	260	℃	DSC

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	< 8.0E+2	ohms	IEC 60093

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature – hot air dryer	80	°C
Drying time – hot air dryer	2.0 to 12	hr
Processing (melt) temperature	280 to 300	°C
Mold temperature	80 to 120	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.