Eltex® A2010PWC

About
Eltex® A2010PWC is a non stabilised high density polyethylene flake (powder) manufactured by INEOS Polyolefins using their supported catalyst process. It is a homopolymer with a narrow molecular weight distribution. Applications Raw material for Wood Plastic Composites Benefits and Features High density Polyethylene Well defined powder granulometry to be mixed with wood flour&&

Product Description
Supplier	INEOS
Generic	HDPE
Material Status	Commercial: Active
Features	Weight distribution,High density,Homopolymer
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.959	g/cm³	ISO 1183/A
Melt Flow Rate
190℃，2.16kg	0.50	g/10min	ISO 1133

THERMAL	Nominal value	Unit	Test method
Melting temperature	136	℃	ISO 11357-3

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.