| About |
|---|
| Polyether block amide PEBAX® 2533 SA 01 MED is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices. PEBAX® 2533 SA 01 MED also offers an excellent combination of properties such as: kink resistance, low friction coefficient and superior dynamic response. Upon request letters regarding USP Class VI testing can be provided.&& |
| Product Description | |
|---|---|
| Generic | TES |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.890 | g/cm³ | ISO 1183 |
| Melt Volume Rate | |||
| 230℃，5 kg | 6.00 | cm³/10min | ISO 1133 |
| Spiral flow length | 28.0 | cm | Internal Method |
| Shrinkage rate | |||
| MD：23℃ | 1.5 | % | ISO 294-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 33 | ISO 868 | |
| tensile strength | ISO 527-2/5A/500 | ||
| fracture | 13.0 | MPa | ISO 527-2/5A/500 |
| Fracture, -35 ℃ | 23.6 | MPa | ISO 527-2/5A/500 |
| Fracture, 85 ℃ | 3.70 | MPa | ISO 527-2/5A/500 |
| Tensile strain | ISO 527-2/5A/500 | ||
| fracture | 180 | % | ISO 527-2/5A/500 |
| Fracture, -35 ℃ | 73 | % | ISO 527-2/5A/500 |
| Fracture, 85 ℃ | 180 | % | ISO 527-2/5A/500 |
| Bending modulus | ISO 178 | ||
| — | 240 | MPa | ISO 178 |
| 85℃ | 69.0 | MPa | ISO 178 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | ISO 34-1 | ||
| — | 76 | kN/m | ISO 34-1 |
| -35℃ | 150 | kN/m | ISO 34-1 |
| 85℃ | 47 | kN/m | ISO 34-1 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| -45℃ | 75 | kJ/m² | ISO 180 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Condition A |
| 3. 3 points |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |