G-COAT™ 500 - SOLIAO

About
Product Details: G-COAT 500 series of water based liquid dispersions are available, where thinner coating and difficult geometries must be coated, and get enhanced properties such as wear & abrasion resistance and release properties, suitable for food contact applications, color natural. G-COAT 500: A pure G-COAT dispersion with typical properties like, very high continuous use temperatures of 280°C (550°F), excellent wear, abrasion, chemical and excellent radiation resistance. Available in natural color, green & black.&&

About

Product Details: G-COAT 500 series of water based liquid dispersions are available, where thinner coating and difficult geometries must be coated, and get enhanced properties such as wear & abrasion resistance and release properties, suitable for food contact applications, color natural. G-COAT 500: A pure G-COAT dispersion with typical properties like, very high continuous use temperatures of 280°C (550°F), excellent wear, abrasion, chemical and excellent radiation resistance. Available in natural color, green & black.&&

Product Description
Generic	PEK
Material Status	Commercial: Active
Features	Gamma radiation,Food contact compliance,High Heat Resistance,Good wear resistance,Solvent resistance
Availabilitys	Africa & Middle East ,North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.30	g/cm³
Water absorption rate
balance	0.060	%	ASTM D570
Solid content	45	%
viscosity	1.7	min

MECHANICAL	Nominal value	Unit	Test method
Taber abraser
1000 cycles, CS-10 wheel	10.0	mg	ASTM D1242

THERMAL	Nominal value	Unit	Test method
Continuous use temperature	280	℃	UL 746B
Glass transition temperature	152	℃	ASTM D3418
Melting temperature	372	℃	ASTM D3418

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
0.80 mm	V-0		UL 94

Supplementary information	Nominal value	Unit	Test method
Maximum Layer Thickness（per coat）	100.0 to 120.0	µm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.