| About |
|---|
| Vydyne 21ZLV is a lower-viscosity, general-purpose PA66 resin. It is available in natural and designed for extrusion-compounding applications. Vydyne 21ZLV is the feedstock of choice for highly filled products and reactive-compounding applications. Vydyne 21ZLV maintains the chemical resistance typical of PA66 to many chemicals, machine and motor oils, solvents and gasoline.&& |
| Product Description | |
|---|---|
| Supplier | Ascend |
| Generic | PA66 |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good flexibility,Low Viscosity,Good wear resistance,Grease resistance,Solvent resistance,Gasoline resistance |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.14 | g/cm³ | ISO 1183 |
| Viscosity (H2SO4 (sulfuric acid)) | 112 to 122 | cm³/g | ISO 307 |
| bulk density | 674 | g/l | ASTM D1895 |
| water content | < 0.35 | % | ASTM D6869 |
| Relative viscosity | 34.0 to 37.0 | ASTM D789 | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 260 | ℃ | ISO 11357-3 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Yellowness index | < 15 | YI | ASTM D1925 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Amino End Groups | 50 mmol/kg, min | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Formic acid |
| 3. STM-00344 (APM internal test protocol) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |