| About |
|---|
| Rilsamid® AESN BLACK P201 TL resin is a black colored polyamide 12. This grade is plasticized and designed for tube extrusion. Rilsamid® AESN BLACK P201 TL resin falls into the PA12-PHLY category according to DIN 73378.&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | PA12 |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Lubricating,Plasticizing,Heat Stabilized |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Profile extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.01 | g/cm³ | |
| Melt Volume Rate | |||
| 235℃，5 kg | 5.00 | cm³/10min | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | — | MPa | |
| tensile strength | |||
| yield | — | MPa | |
| Tensile strain | |||
| yield | — | % | |
| Nominal tensile fracture strain | — | % |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -30℃ | — | kJ/m² | |
| 23℃ | — | ||
| Charpy Unnotch Impact strength | |||
| -30℃ | — | ||
| 23℃ | — |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 176 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |