ExxonMobil™ HDPE HD 6719 Series

About
HD 6719 is a narrow molecular weight hexene copolymer designed for a wide range of injection molding applications, combining easy processability with good toughness properties. Ideally suited for articles requiring low warpage, glossy surfaces and cold temperature impact resistance.&&

Product Description
Supplier	ExxonMobil
Generic	Ultra-high molecular weight polyethylene
Material Status	Commercial: Active
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
190℃，2.16kg	19	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
10% non-ionic detergent, F50	< 1.00	hr	ASTM D1693B

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	25.7	MPa	ASTM D638
Bending modulus			ASTM D790B
1% secant	1270	MPa	ASTM D790-B
2% secant	1110	MPa	ASTM D790-B

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
-40℃	32	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	45.7	℃	ASTM D648-B
0.45 MPa, unannealed	73.5	℃	ASTM D648
Melting peak temperature	131	℃	ASTM D3418

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.