ENFLEX VL-120-60A

About
Standard, fully vulcanized EPDM/PP series&&

Product Description
Material Status	Commercial: Negative
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.960	g/cm³	ISO 2781

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	60		ISO 868

elastic body	Nominal value	Unit	Test method
tensile strength			ISO 37
fracture	6.10	MPa	ISO 37
100% strain	2.30	MPa	ISO 37
300% strain	4.20	MPa	ISO 37
Tensile strain
fracture	430	%	ISO 37
tear strength	34	kN/m	ISO 34-1
Compression deformation			ASTM D395B
70℃，22 hr	26	%	ASTM D395B
100℃，22 hr	30	%	ASTM D395B

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-55.0	℃	ISO 974
Maximum Dynamic Service Temperature	135	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.