| About |
|---|
| Chansieh Phenolic J-262-1是一种酚醛 (Phenolic)材料,含有的填充物为木粉。 该产品在亚太地区有供货,加工方式为:注射成型。 典型应用领域包括: 厨房用具 电气/电子应用 电气用具 汽车行业&& |
| Product Description | |
|---|---|
| Supplier | Chansieh |
| Generic | 酚醛树脂 |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.42 to 1.46 | g/cm³ | JIS K6915 |
| Apparent density | 0.62 to 0.67 | g/cm³ | JIS K6915 |
| Shrinkage rate | 1.0 to 1.2 | % | JIS K6915 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| bending strength | 78.5 to 98.1 | MPa | JIS K6915 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | 24.5 to 34.3 | J/m | JIS K6915 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| deformation | > 160 | ℃ | JIS K6915 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | 9.0 to 11 | kV/mm | JIS K6915 |
| insulation resistance | JIS K6915 | ||
| Boiling | 1.0E+7 to 1.0E+8 | ohms | JIS K6915 |
| Normal | 1.0E+9 to 1.0E+10 | ohms | JIS K6915 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Heat resistance | 180 | ℃ | JIS K6915 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |