| About |
|---|
| SABIC® PPcompound 8503 is a development grade, modified mineral filled Polypropylene for automotive exterior applications. This material has been designed to combine excellent paint adhesions, high modulus and high impact. SABIC® PPcompound 8503 is a designated automotive grade.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | High impact resistance,Sprayable |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.04 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 6.0 | g/10min | ISO 1133 |
| Shrinkage rate | |||
| 24 hrs | 0.75 to 0.80 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| injection molding | 1650 | MPa | ISO 527-2/1A |
| tensile strength | ISO 527-2/1A | ||
| Yield, injection molding | 20.0 | MPa | ISO 527-2/1A |
| Fracture, injection molding | 12.0 | MPa | ISO 527-2/1A |
| Tensile strain | |||
| Fracture, injection molding | 40 | % | ISO 527-2/1A |
| Bending modulus | |||
| injection molding | 1700 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23 ℃, injection molding | 无断裂 | ISO 180/1A |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type 1A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |