ISPLEN® PM 281 EV

About
Polypropylene copolymer, 20% mineral fillers reinforced and good melt flow rate. ISPLEN PM281 EV was designed showing a high stiffness with a good impact resistance, and a low warpage and high shrinkage behaviour. It shows really good gloss surface and an excellent scratch resistance. The product is UV stabilised. APPLICATIONS Automotive: Interior trims and panels. Technical pieces, in general.&&

Product Description
Supplier	REPSOL
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,Low warping,Good surface appearance,High impact resistance,Good liquidity,High scratch resistance,High shrinkage
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.06	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	21	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	21.0	MPa	ISO 527-2
Bending modulus	2200	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ISO 180
-40℃	2.0	kJ/m²	ISO 180
0℃	3.5	kJ/m²	ISO 180
23℃	4.0	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	103	℃	ISO 75-2/B
1.8 MPa, unannealed	55.0	℃	ISO 75-2/A

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Burning rate	98	mm/min	ISO 3795
atomization	98	mm/min	FLTM BO 116-03

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.