| About |
|---|
| HD 3840 UA is an UV virgin medium density polyethylene copolymer grade with a narrow molecular weight distribution supplied in a pellet form.&& |
| Product Description | |
|---|---|
| Generic | MDPE |
| Material Status | Commercial: Negative |
| Features | Good Rigidity,Excellent Processability,Good surface appearance,High impact resistance,Weight distribution,Copolymer |
| Availabilitys | Africa & Middle East ,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.938 | g/cm³ | ISO 1872-1 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 4.0 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 23℃，F50 | 200 | hr | ASTM D1693 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 18.0 | MPa | Internal Method |
| Tensile strain | |||
| fracture | 1400 | % | Internal Method |
| Bending modulus | 750 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | 20 | kJ/m² | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |