Braskem PP DR7037.01

About
DR7037.01 Developmental Polypropylene is a random copolymer for thin wall injection moulding applications. This grade is characterized by excellent balance of stiffness and impact properties, very good optical properties and excellent processability. Applications: Thin wall packaging e.g. container, caps and lids Thin wall consumer goods e.g. Housewares, media packaging Process: Injection Moulding&&

About

DR7037.01 Developmental Polypropylene is a random copolymer for thin wall injection moulding applications. This grade is characterized by excellent balance of stiffness and impact properties, very good optical properties and excellent processability. Applications: Thin wall packaging e.g. container, caps and lids Thin wall consumer goods e.g. Housewares, media packaging Process: Injection Moulding&&

Product Description
Supplier	Braskem
Generic	PP copolymer
Material Status	Commercial: Negative
Features	Good Rigidity,Excellent Processability,High impact resistance,Optical performance,Random copolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	20	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
0 ℃, injection molding	2.0	kJ/m²	ISO 179/1eA
23 ℃, injection molding	6.0	kJ/m²	ISO 179/1eA

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	80.0	℃	ISO 75-2/B
1.8 MPa, unannealed	48.0	℃	ISO 75-2/A
Vicat Softening Temp
—	128	℃	ISO 306/A
—	70.0	℃	ISO 306/B

optical performance	Nominal value	Unit	Test method
Haze
Injection molded film	11	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, injection molding	65		ISO 868
Tensile modulus
injection molding	1060	MPa	ISO 527-2
tensile strength
Yield, injection molding	30.0	MPa	ISO 527-2
Tensile strain
Yield, injection molding	11	%	ISO 527-2
Bending modulus
injection molding	1200	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.