Tecnoflon® FOR 5351/U

About
TECNOFLON® FOR 5351/U is a low viscosity cure incorporated fluoroelastomer copolymer. This grade has excellent flow and good compression set. Tecnoflon® FOR 5351/U can be used for molded items with complicated shapes which require a very good hot tear resistance for part removal. Some of the basic properties of Tecnoflon® FOR 5351/U are: Very fast cure rate Very good scorch safety Superior mold flow Excellent mold release Lack of mold fouling Low compression set High elongation Excellent hot tear strength TECNOFLON® FOR 5351/U can be used for injection and transfer moulding of gaskets and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers. The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.&&

About

TECNOFLON® FOR 5351/U is a low viscosity cure incorporated fluoroelastomer copolymer. This grade has excellent flow and good compression set. Tecnoflon® FOR 5351/U can be used for molded items with complicated shapes which require a very good hot tear resistance for part removal. Some of the basic properties of Tecnoflon® FOR 5351/U are: Very fast cure rate Very good scorch safety Superior mold flow Excellent mold release Lack of mold fouling Low compression set High elongation Excellent hot tear strength TECNOFLON® FOR 5351/U can be used for injection and transfer moulding of gaskets and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers. The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.&&

Product Description
Supplier	Solvay
Generic	氟橡胶
Material Status	Commercial: Active
Features	High elastic,Halogen free
Availabilitys	Africa & Middle East ,Latin America,Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Mooney viscosity
ML 1+10，121℃	24	MU
Fluorine content	66	%

Notes
1. Typical properties: these are not to be construed as specifications.
2. Raw polymer
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.