DINALON® PA 6 ESPECIAL IMPACTO MEDIO

About
DINALON® PA 6 ESPECIAL IMPACTO MEDIO is a Polyamide 6 (Nylon 6) product. It can be processed by injection molding and is available in Europe. Characteristics include: Flame Rated Impact Modified Impact Resistant&&

Product Description
Generic	PA6
Material Status	Commercial: Active
Features	High impact resistance,HB
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.11	g/cm³	ASTM D792
Shrinkage rate
MD	2.5	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength	55.0	MPa	ASTM D638
Tensile strain
fracture	45	%	ASTM D638
Bending modulus	1800	MPa	ASTM D790
bending strength	65.0	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam	300	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	170	℃	ASTM D1525

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	240	°C
Mold temperature	60	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.