| About |
|---|
| Panlite SH系列将树脂分子重新设计，在维持了PC原有的高透明性和耐冲击等特性的同时，成功地将表面硬度提高到了铅笔硬度/H。 因有表面保护所以可以省略涂层或涂装工序，有效降低生产成本、提高生产性。 降低涂层和涂装所造成的环境压力。 |
| Product Description | |
|---|---|
| Supplier | TEIJIN |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,High scratch resistance,Ammonium-tolerant |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.15 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| 23℃，24hr | 0.1 | % | ISO 62 |
| 0.3 | % | ISO 62 | |
| Melt Volume Rate | |||
| 300℃，1.2 kg | 18 | cm³/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Pencil hardness (750g) | 2H | JIS K5600 | |
| Rockwell hardness | |||
| M-level | 102 | ISO 2039-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa | 102 | ℃ | ISO 75-1/2 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Full light transmittance (2mmt) | 90 | % | ASTM |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of simply supported beam (23 ℃) | |||
| Gap | 3 | kJ/m² | ISO 179 |
| No gap | NB | kJ/m² | ISO 179 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |