PrimoTuff 3000E

About
Thermoplastic Polyolefins are rigid products with exceptional dimensional stability and good balance of impact and toughness. PureTuff is offered in a wide range of melt flows (MFR 0.5 to 100) suitable for profile extrusion, sheet extrusion and molding applications. Exceptional cold temperature impact. Depending on product rigidity, some products are ductile to as low as -30°C. Excellent dimensional stability Outstanding rigidity Fully Weatherable Recyclable PPI will customize to adjust for mold shrink required by the customer Full range of colors&&

About

Thermoplastic Polyolefins are rigid products with exceptional dimensional stability and good balance of impact and toughness. PureTuff is offered in a wide range of melt flows (MFR 0.5 to 100) suitable for profile extrusion, sheet extrusion and molding applications. Exceptional cold temperature impact. Depending on product rigidity, some products are ductile to as low as -30°C. Excellent dimensional stability Outstanding rigidity Fully Weatherable Recyclable PPI will customize to adjust for mold shrink required by the customer Full range of colors&&

Product Description
Generic	Polyolefin Elastomer
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,Good flexibility,High impact resistance,Good Dimensional Stability,Renewable resources,low-temperature impact resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.07	g/cm³
Melt Flow Rate
230℃，2.16kg	1.0	g/10min

MECHANICAL	Nominal value	Unit
tensile strength
yield	21.0	MPa
Bending modulus	2100	MPa

IMPACT	Nominal value	Unit
Impact strength of cantilever beam notch
23℃	50	kJ/m²
30 ℃, localized fracture	7.0	kJ/m²

THERMAL	Nominal value	Unit
Hot deformation temperature
0.45 MPa, unannealed	150	℃
Linear coefficient of thermal expansion
MD	4.0E-5	1/℃

Supplementary information	Nominal value	Unit	Test method
AMMS	0.70	%
Ductility	-30	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.