SQUARE® LSG1001-09A/B

About
Silicone gel for breast prosthesis Product Description This product is low viscosity, transparent and middle strength 2-part liquid silicone rubber, suitable for pour molding processes. Key Features Easy to be cured High transparent Catalyzed by platinum, non-toxic and no peculiar smell. Excellent thermal and cold stability (-50°C to 200°C) Shore A hardness is 0° Have electric capability when the electric filling is added Applications Breast prosthesis.&&

About

Silicone gel for breast prosthesis Product Description This product is low viscosity, transparent and middle strength 2-part liquid silicone rubber, suitable for pour molding processes. Key Features Easy to be cured High transparent Catalyzed by platinum, non-toxic and no peculiar smell. Excellent thermal and cold stability (-50°C to 200°C) Shore A hardness is 0° Have electric capability when the electric filling is added Applications Breast prosthesis.&&

Product Description
Supplier	SQUARE
Generic	硅橡胶,LSR
Material Status	Commercial: Active
Features	Good Rigidity,Good Clarity,Low Viscosity,Low odor,Nontoxicity,Heat Stabilized
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
Electrical performance	Nominal value	Unit	Test method
Volume resistivity	2.0E+15	ohms·cm	IEC 60093
Dielectric constant
50 Hz	2.70		IEC 60250
Dissipation factor
50 Hz	2.0E-3		IEC 60250

THERMAL	Nominal value	Unit
Thermosetting components
Component A	按重量计算的混合比: 1.0
Component B	按重量计算的混合比: 1.0
storage stability
23℃	480	min
Storage period	52	wk

Uncured Properties	Nominal value	Unit	Test method
viscosity	0.60 to 1.0	Pa·s	DIN 53019

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.