| About |
|---|
| apilon 52c® ESC 40 is a Thermoplastic Polyurethane Elastomer (PC Based) (TPU-PC) product. It is available in Europe. Primary characteristic: bacteria resistant.&& |
| Product Description | |
|---|---|
| Generic | PC+TPU |
| Material Status | Commercial: Active |
| Features | Hydrolysis stability,Antimicrobial properties,Soft |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20 | g/cm³ | ASTM D792 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 100 | kN/m | ASTM D624 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 190 to 210 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw’s A | 90 | ASTM D2240 | |
| Shaw’s D | 41 | ASTM D2240 | |
| Tensile modulus | ASTM D638 | ||
| 100% secant | 7.00 | MPa | ASTM D638 |
| 300% secant | 13.0 | MPa | ASTM D638 |
| tensile strength | 45.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 500 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |