Bamtac BPP340A

About
BPP340A, a composite of PP and bamboo fiber. BFC , with natural fiber, effectively improve the mechanical strength and heat deflection temperature of BFC material, which possesses low shrinkage, soothing and fine looking surface,and keeps the natural features of antibiosis and deodorization.&&

Product Description
Supplier	Bamtac
Generic	PP not specified
Material Status	Commercial: Active
Features	Good surface appearance,Low contractility
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05 to 1.07	g/cm³	ISO 1183
Melt Flow Rate
200℃，5.0kg	15 to 20	g/10min	ISO 1133
Shrinkage rate	0.30 to 0.70	%

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	> 8.0	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	105	℃	ISO 75-2/A

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	65 to 70
Tensile modulus	> 1400	MPa	ISO 527-2
tensile strength	> 15.0	MPa	ISO 527-2
Tensile strain
fracture	> 7.0	%	ISO 527-2
Bending modulus	> 1200	MPa	ISO 178
bending strength	> 28.0	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.