| About |
|---|
| Product information PA 2210 FR is a polyamide 12 for processing in laser sintering systems with a halogen free, chemical flame retardant. In case of fire a carbonating coating arises on the surface of the part, isolating the plastic below. Properties free of halogens higher stiffness compared to unfilled PA 12 Acceptance criteria JAR 25 (aviation) UL 94 (Electrical & Electronics) Typical applications aviation (e.g. air ducts) plastic parts in devices and appliances (e.g. E&E housings)&& |
| Product Description | |
|---|---|
| Generic | PA12 |
| Material Status | Commercial: Active |
| Features | Halogen free,Flame Characteristics,Grease resistance,Solvent resistance,High crystallization,Heat Stabilized |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | 3D Printing, Laser Sintering/Melting |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.06 | g/cm³ | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| — | 2300 | MPa | ISO 527-2 |
| — | 2500 | MPa | ISO 527-2 |
| tensile strength | |||
| 3% strain | 41.0 | MPa | ISO 527-2 |
| 4% strain | 46.0 | MPa | ISO 527-2 |
| 4% strain | — | MPa | ISO 527-2 |
| 6% strain | — | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 3.0 | % | ISO 527-2 |
| fracture | 4.0 | % | ISO 527-2 |
| Bending modulus | |||
| 23℃ | 2300 | MPa | ISO 178 |
| bending strength | 65.0 | MPa | ISO 178 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 185 | ℃ | ISO 11357 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Z Direction |
| 3. Y Direction |
| 4. X Direction |
| 5. 20°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |