Ateva® 2821A

About
This resin is commonly used for extrusion coating, coextrusion, and specialty lamination applications.&&

Product Description
SupplierCelanese
GenericEVA
Material StatusCommercial: Active
FeaturesInoxidizability,Copolymer
AvailabilitysNorth America

Technical Data
PHYSICALNominal valueUnitTest method
Density0.948g/cm³ASTM D792
Melt Flow Rate
190℃,2.16kg25g/10minASTM D1238
Vinyl acetate content28%

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s A80ASTM D2240
tensile strength
23℃11MPaASTM D638
Tensile strain
Fracture, 23 ℃850%ASTM D638

Notes
1. Typical properties: these are not to be construed as specifications.
2. Type IV, 2.0 in/min
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.