| About |
|---|
| SBS based compound, ideal for PP over-moulding in food contact applications. It provides the item with good grip and surface soft touch. Application: Inseminator (Veterinary)&& |
| Product Description | |
|---|---|
| Generic | SBS |
| Material Status | Commercial: Active |
| Features | Food contact compliance,Soft |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.10 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 90 | g/10min | ASTM D1238 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 23 | kN/m | ISO 34-1 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Operating temperature | -30 to 70 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 55 | ISO 868 | |
| tensile strength | |||
| fracture | 3.40 | MPa | ISO 527-2 |
| Nominal tensile fracture strain | 660 | % | ISO 527-2 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying time | 0.0 | hr | |
| Barrel rear temperature | 165 to 185 | °C | |
| Barrel middle temperature | 170 to 190 | °C | |
| Barrel front temperature | 175 to 195 | °C | |
| Nozzle temperature | 180 to 200 | °C | |
| Mold temperature | 30 to 40 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |