| About |
|---|
| 50% stainless steel + 50% virgin PTFE&& |
| Product Description | |
|---|---|
| Generic | PTFE |
| Material Status | Commercial: Active |
| Features | High liquidity |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 3.28 | g/cm³ | ASTM D4894 |
| Apparent density | 1.12 | g/cm³ | ASTM D4894 |
| Average particle size | 760 | µm | Internal Method |
| Shrinkage rate | |||
| Diameter | 1.4 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 61 | ASTM D2240 | |
| Rockwell hardness | 42 | ASTM D785 | |
| tensile strength | |||
| TD，1 mm | 20.0 | MPa | ASTM D4894 |
| Tensile strain | |||
| TD, fracture, 1 mm | 160 | % | ASTM D4894 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |