| About |
|---|
| Multi-Flex® TPE A9002是一种热塑性弹性体(TPE)产品,。 它,在亚太地区、北美洲、拉丁美洲、欧洲或非洲和中东有供货。 典型应用领域为:汽车行业。&& |
| Product Description | |
|---|---|
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Sprayable |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.987 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 7.3 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 10 seconds | 84 | ASTM D2240 | |
| Bending modulus | 89.6 | MPa | ASTM D790 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 11.0 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 680 | % | ASTM D412 |
| tear strength | 57.8 | kN/m | ASTM D624 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 66 | °C | |
| Drying time | 1.0 to 2.0 | hr | |
| Barrel rear temperature | 193 | °C | |
| Barrel middle temperature | 204 | °C | |
| Barrel front temperature | 216 | °C | |
| Nozzle temperature | 216 | °C | |
| Processing (melt) temperature | 216 | °C | |
| Mold temperature | 27 to 43 | °C | |
| Injection speed | Moderate-Fast | ||
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |