PALSAFE® R 10

About
PALSAFE® R 10 is a Polycarbonate (PC) product. It can be processed by injection molding and is available in Europe. Applications of PALSAFE® R 10 include appliances and electrical/electronic applications. Characteristics include: Flame Rated High Hardness High Strength Impact Resistant Medium Viscosity&&

Product Description
Generic	Polycarbonate
Material Status	Commercial: Active
Features	Good Rigidity,High impact resistance,Good Hardness,V-2
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.19	g/cm³	ISO 1183
Melt Volume Rate
300℃，1.2 kg	12.0	cm³/10min	ISO 1133
Water absorption rate			ISO 62
Saturation, 23 ℃	0.30	%	ISO 62
Equilibrium, 23 ℃, 50% RH	0.18	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
23℃	2300	MPa	ISO 527-2/1A/1
tensile strength
Yield, 23 ℃	61.0	MPa	ISO 527-2/1A/50
Tensile strain
Yield, 23 ℃	5.0	%	ISO 527-2/1A/50
Nominal tensile fracture strain
23℃	50	%	ISO 527-2/1A/50

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength
23℃	无断裂		ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
B50	144	℃	ISO 306

Electrical performance	Nominal value	Unit	Test method
Compared to the leakage tracing index
Solution A	275	V	IEC 60112

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	V-2		UL 94

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.