FLEXOMER™ ETS-9078 NT 7

About
Excellent drawdown characteristics Low modulus blend component Complies with: U.S. FDA 21 CFR 1520 (c) 3.1a (with restrictions) European Commission Regulation (EU) No 10/2011 An additive present in this product limits use only in film form for food contact applications. Consult the regulations for complete details. FLEXOMER™ ETS -9078 NT 7 Very Low Density Polyethylene (VLDPE) Resin is intended primarily for slot cast extrusion. This narrow molecular weight distribution resin has outstanding drawdown properties and produces low modulus cast films, high clarity and an excellent balance of toughness and stiffness.&&

About

Excellent drawdown characteristics Low modulus blend component Complies with: U.S. FDA 21 CFR 1520 (c) 3.1a (with restrictions) European Commission Regulation (EU) No 10/2011 An additive present in this product limits use only in film form for food contact applications. Consult the regulations for complete details. FLEXOMER™ ETS -9078 NT 7 Very Low Density Polyethylene (VLDPE) Resin is intended primarily for slot cast extrusion. This narrow molecular weight distribution resin has outstanding drawdown properties and produces low modulus cast films, high clarity and an excellent balance of toughness and stiffness.&&

Product Description
Supplier	DOW
Generic	VLDPE
Material Status	Commercial: Active
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.910	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	2.5	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	90.0	℃	ASTM D1525
Melting temperature
DSC	120	℃	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.