TOTAL Polypropylene PPH 3740WR

About
Polypropylene 3740WR exhibits exceptionally easy flow characteristics. FDA: 3740WR complies with all applicable FDA and USDA regulations and may be used under these provisions for food contact and packaging. Applications: 3740WR is recommended for injection molding medical applications requiring high stiffness and good gamma radiation stability up to 50 kGy. Processing: 3740WR resin processes on conventional injection molding equipment with typical melt temperatures of 350-450°F (177-232°C).&&

About

Polypropylene 3740WR exhibits exceptionally easy flow characteristics. FDA: 3740WR complies with all applicable FDA and USDA regulations and may be used under these provisions for food contact and packaging. Applications: 3740WR is recommended for injection molding medical applications requiring high stiffness and good gamma radiation stability up to 50 kGy. Processing: 3740WR resin processes on conventional injection molding equipment with typical melt temperatures of 350-450°F (177-232°C).&&

Product Description
Supplier	TOTAL
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,High liquidity,Gamma radiation,Nucleation,Food contact compliance,Homopolymer
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	20	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	75		ASTM D1706
Tensile modulus	1650	MPa	ASTM D638
tensile strength
yield	37.2	MPa	ASTM D638
Tensile strain
yield	7.0	%	ASTM D638
Bending modulus	1720	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	16	J/m	ASTM D256-A
Dart impact equipped with measuring instruments
3.18 mm	0.565	J

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	116	℃	ASTM D648
Melting temperature	165	℃	DSC

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	177 to 232	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.