Converge® Polyol HMA-2

About
Converge HMA-2 is a 1800 molecular weight blend optimized for viscosity and hydroxyl number. Carbon dioxide accounts for approximately 30% of the polyol mass. Applications: Converge HMA-2 is an opti mized blend primarily for use in Hot Melt Adhesive formulations. It may also have benefits in coatings, elastomers, and other applications where low viscosity and flowability are important. Features: The aliphatic polycarbonate backbone delivers unique high performance to polyurethanes in terms of both strength and environmental resistance. In adhesive applications, it provides improved adhesive & cohesive strength and hydrolytic stability when used with many substrates including wood, aluminum, polycarbonate, and PVC. In coatings, it delivers UV resistance and high hardness. Converge HMA-2 can also improve abrasion resistance.&&

About

Converge HMA-2 is a 1800 molecular weight blend optimized for viscosity and hydroxyl number. Carbon dioxide accounts for approximately 30% of the polyol mass. Applications: Converge HMA-2 is an opti mized blend primarily for use in Hot Melt Adhesive formulations. It may also have benefits in coatings, elastomers, and other applications where low viscosity and flowability are important. Features: The aliphatic polycarbonate backbone delivers unique high performance to polyurethanes in terms of both strength and environmental resistance. In adhesive applications, it provides improved adhesive & cohesive strength and hydrolytic stability when used with many substrates including wood, aluminum, polycarbonate, and PVC. In coatings, it delivers UV resistance and high hardness. Converge HMA-2 can also improve abrasion resistance.&&

Product Description
Generic	Polycarbonate
Material Status	Commercial: Active
Features	Weather resistance is good,Good flexibility,Hydrolysis stability,Low Viscosity,Good Hardness,Good bond,Aliphatic series
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.20	g/cm³	ISO 1183
molecular weight	1800	g/mol
water content	< 500	ppm
acid value	< 0.50	Mg KOH/g
viscosity
75℃	10.5	Pa·s

Supplementary information	Nominal value	Unit
Functionality	2.00
OH Value	67.0	Mg KOH/g
Polydispersity	1.10

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.