Delta PCR-1G30

About
Delta PCR-1G30 is a Polycarbonate (PC) product filled with 15% glass fiber. It is available in North America.&&

Product Description
Generic	Polycarbonate
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.30	g/cm³	ASTM D792
Melt Flow Rate	11	g/10min	ASTM D1238
Shrinkage rate
MD	0.20	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	77.6	MPa	ASTM D638
Tensile strain
fracture	12	%	ASTM D638
Bending modulus	3310	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	110	J/m	ASTM D256

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Burning rate	< 100	mm/min	ISO 3795

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.