| About |
|---|
| Ecomass® Compound 1950TU76. Nontoxic alternative to Lead (Pb), weighting and balancing applications. Features: Tungsten Powder Filled Polyamide (PA6/10), Very Good Toughness.&& |
| Product Description | |
|---|---|
| Generic | PA610 |
| Material Status | Commercial: Active |
| Features | Good flexibility,Nontoxicity |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 3.80 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| MD | 1.0 to 1.2 | % | ISO 294-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2970 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 43.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 11 | % | ISO 527-2 |
| Bending modulus | 2400 | MPa | ISO 178 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 80 | °C | |
| Drying time | 4.0 to 6.0 | hr | |
| Recommended maximum moisture content | 0.20 | % | |
| Processing (melt) temperature | 230 to 250 | °C | |
| Mold temperature | 65 to 80 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |