| About |
|---|
| CP 393 is a heterophasic polypropylene copolymer with medium melt flow rate. This product presents very good balance of rigidity / impact resistance, good productivity and dimensional stability. Applications: Compounds Processing: Injection Molding&& |
| Product Description | |
|---|---|
| Supplier | Braskem |
| Generic | PP homopolymerization |
| Material Status | Commercial: Negative |
| Features | Good Rigidity,High impact resistance,Good Dimensional Stability,Moderate liquidity,Copolymer |
| Availabilitys | Latin America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.895 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 9.0 | g/10min | ASTM D1238 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -20 ℃, injection molding | 85 | J/m | ASTM D256 |
| 23 ℃, injection molding | 无断裂 | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed, injection molded | 90.0 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed, injection molded | 50.0 | ℃ | ASTM D648 |
| Vicat Softening Temp | 140 | ℃ | ASTM D1525 2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 55 | ASTM D785 | |
| tensile strength | |||
| Yield, injection molding | 21.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Yield, injection molding | 8.0 | % | ASTM D638 |
| Bending modulus | |||
| 1% cut, injection molding | 950 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |