Softell CA 7413 A

About
Softell CA 7413 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell’ s proprietary Catalloy process technology. It is suitable for the extrusion, calendering and extrusion blow moulding of very soft film and sheet as well as for injection moulded parts. Softell CA 7413 A exhibits outstanding low stiffness, excellent low hardness and very good impact resistance. Softell CA 7413 A shows high compatibility to fillers and flame retardant additives as well as to other polyolefins. The grade is available in natural pellet form. For regulatory compliance information, please refer to Softell CA 7413 A Product Stewardship Bulletin (PSB)&&

About

Softell CA 7413 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell’ s proprietary Catalloy process technology. It is suitable for the extrusion, calendering and extrusion blow moulding of very soft film and sheet as well as for injection moulded parts. Softell CA 7413 A exhibits outstanding low stiffness, excellent low hardness and very good impact resistance. Softell CA 7413 A shows high compatibility to fillers and flame retardant additives as well as to other polyolefins. The grade is available in natural pellet form. For regulatory compliance information, please refer to Softell CA 7413 A Product Stewardship Bulletin (PSB)&&

Product Description
Supplier	LyondellBasell
Generic	Polyolefin Elastomer
Material Status	Commercial: Active
Features	Good flexibility,High impact resistance,Low Hardness,Heat Resistance, Good,Soft,low-temperature impact resistance,High ESCR
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.870	g/cm³	ISO 1183/A
Melt Flow Rate
230℃，2.16kg	2.8	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	76		ISO 868
tensile strength
fracture	8.00	MPa	ISO 527-2
Tensile strain
fracture	> 600	%	ISO 527-2
Bending modulus	20.0	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
A50	41.0	℃	ISO 306/A50
Melting temperature	141	℃	ISO 11357-3

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.