NuSil MED12-6381

About
NuSil Technology’s restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing filler, gels tend to be low in viscosity in the uncured state, allowing flexibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very firm or soft gel, but the work time and cure profile can also be modified. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices. Additionally, NuSil’s restricted tacky gels can be used as temporary adhesives. Comments: FIRM RTV GEL&&

About

NuSil Technology’s restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing filler, gels tend to be low in viscosity in the uncured state, allowing flexibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very firm or soft gel, but the work time and cure profile can also be modified. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices. Additionally, NuSil’s restricted tacky gels can be used as temporary adhesives. Comments: FIRM RTV GEL&&

Product Description
Supplier	NuSil
Generic	硅酮
Material Status	Commercial: Active
Features	Low Viscosity,Permeability,Biocompatible,Room temperature cure
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
THERMAL	Nominal value	Unit	Test method
Thermosetting components
Part C	按重量计算的混合比: 0.50
Component A	按重量计算的混合比: 97
Component B	按重量计算的混合比: 2.5
Post curing time
25℃	24	hr

Supplementary information	Nominal value	Unit	Test method
Cure System	Condensation

Uncured Properties	Nominal value	Unit
Density	0.978	g/cm³
viscosity	10	Pa·s
Curing time
25℃	0.50	hr

Cured Properties	Nominal value	Unit
Shore hardness
Shaw’s OO	75
tensile strength	0.483	MPa
Tensile strain
fracture	130	%

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.