| About |
|---|
| Common grade for molding and extrusion This product has good physical and mechanical properties and processability. This product can be divided into two sub-categories: rubber for molding and rubber for extrusion. The rubber for molding is vulcanized with 2,5-Dimethyl-2,5-di(tert-butylperoxy)hexane as vulcanizator, applicable to manufacturing of industrial miscellaneous parts such as keypads, sealing rings and sealing gaskets; and the rubber for extrusion is vulcanized with vulcanizator DCBP (Di-(2,4-dichlorobenzoyl) Peroxide), applicable to manufacturing of various electric wires, cables, hoses and tapes.&& |
| Product Description | |
|---|---|
| Supplier | DONGJUE |
| Generic | 硅酮 |
| Material Status | Commercial: Active |
| Features | Excellent Processability |
| Availabilitys | Asia Pacific |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.08 to 1.18 | g/cm³ | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 38 to 42 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile permanent deformation | < 14 | % | |
| tensile strength | > 6.50 | MPa | |
| Tensile strain | |||
| fracture | > 450 | % | |
| tear strength | > 16.0 | kN/m |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | > 1.0E+14 | ohms·cm | |
| Dielectric strength | > 18 | kV/mm |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die B |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |